High profile products

At Liniar we have an absolute commitment to ensuring that each and every one of the creations we produce provides our end users with exceptional advantages over those of our competitors.

Because we have been able to design our range from scratch rather than attempting to improve out-of-date systems, we have been able to consider and factor in future legislation and industry guidelines.

We set our stall out to cut out unnecessary costs and to provide products that are easy to manufacture, easy to install and to include a whole host of benefits and features for the end users.

This is why we firmly believe that our products are the best on the market.

Thermal efficiency vs reinforcement

Many ‘first generation’ uPVC windows relied heavily on steel

. It was considered essential to securely fix hardware such as hinges and locking mechanisms, in addition to increasing the stiffness of the frame and reducing deflection when subjected to wind gusts.

For many years, this was the accepted make up of a uPVC window – and some are still manufactured this way.

In more recent times energy efficiency became a more prominent topic and the evolution of window products continued with the introduction of uPVC thermal inserts.

These inserts replaced the thermally inefficient steel, occupying the same internal chamber and creating a

thermal barrier in the same three-chambered profiles.

Not exactly a giant technological leap but more of a ‘gap filler’ and not without its drawbacks – these thin inserts add very little to the stiffness of the profile, nor do they provide a secure fixing for hardware.

This resulted in many window systems providers having two different offerings – one which is thermally efficient (with thermal inserts) and one suitable for enhanced security (with steel).

Best of both worlds

In 2007 the Liniar team set about designing a brand new system with a blank sheet of paper and loads of new ideas – a system which would be both thermally efficient AND strong and secure.

Firstly, there were to be no thermal inserts – the multi-chambered effect was designed to be part of Liniar's uPVC profile, with both the amount of internal webs and their spacing being fine-tuned with Therm software to achieve exceptional thermal performance.

This principal could only be applied to specific profiles within the system, with transoms and mullions remaining steel-reinforced using a steel box section within the central chamber – this provides the rigidity needed within the frame.

Feeling the force

Secondly, the issue of secure fixing for hardware was addressed by incorporating a rectangular pocket directly behind areas where fixings would be used, achieving screw pull-out forces rivalling that of 1.2mm thick steel when inserted with a uPVC screw retainer.

The Liniar window and door system has been independently tested and verified by the British Standards Institute, meeting

security standard with reduced steel and BS6375; air and water leakage and wind loading for structural strength.

By making the most efficient use of materials, the overall cost of manufacturing a window has also been reduced – delivering benefits to fabricators, installers and end users alike.

Co-extruded gaskets

Historically, uPVC window systems were fitted with a range of rubber gaskets at the fabrication stage, similar to the method still used on timber and aluminium windows. The resulting permeability of the assembled frame was dependent upon the quality of each seal joint, with many suffering from draughts and wind noise.

The uPVC extrusion process lends itself to the well-established technology of co-extrusion – adhering the gasket onto the frame using a separate extrusion machine during manufacture. This evolutionary step eliminates the time-consuming gasket insertion process and creates a more reliable corner seal at each joint.

Many uPVC window systems make use of co-extruded gaskets, most adapting existing profiles to the process.

Patented bubble gasket

Starting from scratch, the Liniar team had no constraints, and spent a significant amount of time developing its patented

to outperform all others in speed of fabrication and in permeability – achieving zero air leakage during independent tests at BSI.

The design of both the gasket and the area behind the gasket is crucial, not only to the permeability of the finished window, but during the welding process where hard lumps can form in the corners of each joint, creaking sealed units.

Liniar’s dual-action gasket performs equally well as a soft dynamic seal on opening sashes as it does as a firm glazing for sealed units, its tolerance-friendly design always ensuring a whistle-free seal inside and out – and no gaps, not even in the corners.

Enhanced performance

As the quantity and spacing of internal webs reduce thermal transmittance through Liniar frames, the flow is directed towards the path of least resistance. To address this, the Liniar design team introduced a brace of simple but effective ancillary products for its 70mm system.

The first is the innovative glazing flipper – this can be clipped onto the short central up-stand within the glazing area, creating a thermal barrier and additional gasket, and sealing the perimeter of any glazed unit – keeping the heat in and moisture out.

The second is the patented thermal dam – introduced to address heat loss at the outer edge of the frame, Liniar’s clip-in thermal dam creates a multi-chambered barrier with optimized leg spacing and is manufactured from recycled material produced during the extrusion ‘start-up’ procedure.

The result of this innovative approach is Liniar's supremely energy efficient double or triple glazed 70mm window and door system, which has now been extended to include the ground-breaking Zero|90 system for even higher energy efficiency.